Push Bounce Drain Stopper Electroplating Finish Sink Drain Strainer Hardware Accessories

Label:Yes POPUP MECHANISM DESIGN: spring loaded button popup drainer comes without lift rod, users can twist the top cover counterclockwise to detach and take apart the component NON OVERFLOW SINK COMPATIBILITY: non overflow drain assembly works for vessel sinks and sinks without overflow hole, with top cap diameter of 38 millimeters or 1.50 inches, flange diameter of 62 millimeters or 2.44 inches, upper assembly total height of 80 millimeters or 3.15 inches, tail pipe length of 120 millimeters or 4.72 inches, tail pipe outer diameter of 32 millimeters or 1.26 inches LEAK PREVENTION STRUCTURE: the drain set includes metal hardware and soft silicone gaskets to stop liquid seepage during daily use DURABLE MATERIAL COMBINATION: this sink drain assembly uses brass for drain plug and stainless steel for tail pipe to maintain stable working state over long time use POLISHED SURFACE TREATMENT: the drain part features polished brass finish with mirror like glossy surface to withstand daily surface scratches, fits non overflow sink installation

Item Type: Sink Drain Material: Brass + Stainless Steel + Silicone Color: Silver Process treatment: electroplating Form: British Drain Type: Popup Size: Top Cap Diameter: Approx. 38mm / 1.50in Flange Diameter: Approx. 62mm / 2.44in Total Height of Upper Assembly: Approx. 80mm / 3.15in Tail Pipe Length: Approx. 120mm / 4.72in Tail Pipe Outer Diameter: Approx. 32mm / 1.26in Weight: Approx. 330g / 11.64oz

Installation Steps: 1. First take the head out of the drain and put it lightly into the sink drain hole 2. After placing it flat as shown in the figure above 3. Then put the ring pad at the bottom, screw on the fixing nut, and tighten it with a wrench 4. After fixing the drain as shown above, the drain installation is complete, just connect the upper and lower water pipes

Package List: 1 x Sink Drain 1 x Protection Cover

Notes: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.3. Please make sure the gasket is in the correct position (see product picture) to avoid leakage.