Ανοξείδωτο Ατσάλι 304 Αναδευτήρας Καφέ Μπάρας Χυμού Ρίο Κοκτέιλ Δημιουργικός Αναδευτήρας Στικ Σαμπάνιας Swizzle Sticks

Παρήγγειλα 2 λευκές κούπες . Η μία ήρθε σπασμένη

Καλό αν και χωρίς βομβητή.

Πολύ καλό. Ευχαριστώ

Πολύ μικρά.

Τέλειο

I.o.

The way this seller sends the order through the mail is pathetic, they just put the order in a plastic bag without any bubble wrap or anything to protect the item and sticks a label on and sends it which caused the case that holds the tip to arrive cracked and broken. After screening the tip into my vape mod, when I went to unscrew it the thing was coming apart so I had to put some nut-lock on it to stop it falling apart again so be careful when unscrewing the tip from the power source. In saying that these tips are awesome, makes repairs on the go really possible, just wind some soldering wire into a coil and keep it with the tip and you can repair wires anywhere in the world, except under water of course 😁

In general, the device is good. But unfortunately the contacts are normally closed. Here is the instructions how to make its contacts normally opened. First use heat gun and long strong needle to take out all insides from tube. Second, use other reed switch (i found one in the household inside the glass break sensor, but you can just buy it) place it in the heat shrink tubing and find its position inside the metal tube so that the contacts are normally open when the magnetic float is in the down position and normally closed when the float rises. Then, use a good sealant to seal the hole and to hold the reed switch in correct position inside the tube.