AUTOOL HTS558 Automotive Engine Intake Pipe Valve Clean Machine Carbon Deposits Cleaner Car Cleaning Tools Engine System Wash*

👉Good News!!! PL,DE USA,Europe warehouse in stock, fast delivery, no tax. 👉EU warehouse shipment includes 2 packages of walnut sand AUTOOL HTS558 Car Engine Carbon Deposition Cleaner Intake Pipe Valve Cleaning Machine Decarbonizing Automotive Decarbon Washer AUTOOL HTS558 walnut powder engine Intake pipe valve clean machine is a advanced equipment for clean engine intake carbon deposition.Keeping engine in healthy status, make sure engine provide high quality power constantly.

Safe and Undamaged Walnut sand can deeply remove sticky carbon deposits on intake manifold, intake valve and exhaust valve without damaging them. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.

High Efficiency When the high-pressure air flow and walnut sand are injected into the closed engine intake manifold, they will roll and collide rapidly inside, forming a closed loop of continuous injection and suction, so as to quickly remove the carbon deposits inside.

External Air Source Design The use of external air source can provide continuous external power during the cleaning work, so as to promote the walnut sand particles to more strongly impact the carbon deposition in the pipeline, and more comprehensively complete the carbon deposition removal work.

Integrated Design When the sprayed walnut sand impacts and deposits carbon, the walnut sand particles will be recycled in the equipment at the same time, without manual recycling, saving time and effort.

Practicality The overall structure design is simple and light, beautiful and compact, and has strong practicability. With universal pulley, it can move 360° in all directions, which is convenient and labor-saving.

What is carbon deposition? There are some hydrocarbon olefin residues attach on engine intake,cylinder when fuel burn in engine not completely.It residues change into hard black shell in high temperature condition , that called carbon deposition. What is walnut powder(sand)? Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition,it will clean intake pipe and back side of intake valve thoroughly but no damage.A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.

It was hardly dissolved in acid, alkali and water.Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.It show high performance in the three area: hardness, anti-pressure, wear-resisting. Tips 1.Orders shipped from Poland, Germany, Spain, and the United States include 2 packs (1kg/2.2lbs per pack) of walnut sand; 2.Orders shipped from China Due to transportation restrictions, you will need to purchase walnut sand from the local market

How to use? 1.Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover.

2.Join spary gun muzzle and recycle hose together. (there is a hole on recycle hose)

3.Remove intake manifold of engine, plug spary gun into intake, turn crankshaft to close intake valve.Then connect high pressure air pump((not include)) to HTS558.

4.Connect AC power, start clean. The process should last 1-3 minutes .(depending on carbon deposition circumstances)

5.Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times.(depending on carbon deposition circumstances)

Recommend Reason : 1 Air pump pressure should more than 0.7Mpa (7bar/102PSI)

2 Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)

3 Cleaning time between 1-3 minutes

Bullet point:

AUTOOL HTS558 is a special machine for engine Intake pipe and intake valve back side clean.

Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum.

This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly

Chemical cleaning agent will corrodes pipe and shortens the lifetime of engine.

Walnut powder is pure natural polish material. It show high performance in hardness, anti-pressure and wear-resisting.

Walnut powder hardness was lower than metal but higher than carbon deposition. Take these advatages,

AUTOOL HTS558 will clean clean intake pipe and back side of intake valve thoroughly but no damage

High-precision engine system is sensitive to foreign matter of intake pipe, such as BMW valvetronic system.

That is why we need AUTOOL HTS558 to clean carbon deposition in intake pipe. Engine should be closed before clean,

then turn crankshaft to close intake valve. AUTOOL HTS558 clean one intake pipe each time,

6 cylinder engine should cleaned 6 times one by one(and so on)

AUTOOL HTS558 is specail for intake pipe and intake valve back side clean only,

if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose AUTOOL CT150,AUTOOL CT200 or AUTOOL C100.

High pressure air pump is requirement(not include in package);

Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.

Getting AUTOOL HTS558 immediately, start your new business

Package include: 1x AUTOOL HTS558 unit

2x Spray gun

1x Goggles

1x Recycle hose

1x Recycle hose and spray gun connector

Item Type: Walnut Sand Decarbonizing Machine Feature 1: Car Engine Combustion System Clean Air Flow: <300L/Min Rated Frequency: 50/60HZ Capacity: 13L Key word 6: car decarbonizing machine High-concerned chemical: None Item Width: 44cm Vacuum Suction: 0.02MPa Key word 1: car engine cleaner machine Key word 2: car engine cleaning Key word 4: car engine decarbonizer walnut sand: Shipped from Poland, Germany, Spain, and the United States includes Feature 6: Walnut Blaster Machine Origin: Mainland China Item Weight: 12.7kg Brand Name: AUTOOL Item Length: 63cm Function: Remove engine carbon deposits Key word 3: car engine wash Valve Carbon Deposits Cleaner: for Automotive Engine Intake & Valvetronic System